Create a SphereGizmo anywhere in the scene. Just place it somewhere in a place where it can easily be found, like as shown below
Add a combustion to the SphereGizmo. The setting should be around
Flame Type: Tendril
Flame Size: 20.0
The colors for the combustion are as follows
Inner color
R: 255
G: 248
B: 241
Hue: 37
Sat: 54
Value: 255
Outer color
R: 255
G: 120
B: 30
Hue: 17
Sat: 225
Value: 225
Of course, there's nothing wrong with trying something different
Make an omni light in the center of the combustion gizmo. Put some attentuation on it This is the light that will *supposedly* light up the object you're....lighting up
Color said omni light orange
Create a particle SuperSpray with the following settings and place it inside the center of the SphereGizmo
Basic Parameters
Off Axis: 90.0
Spread: 90.0
Off Plane: 0.0
Spread: 180.0
Particle Generation
Use Rate: 20
Speed: 5.0
Variation: 50.0
Particle Size: 3.0
Particle Type
Tetra
Rotation and Collision
Set to "Direction of Travel/MBlur", and set it to 15
Next, select said SuperSpray, right-click on it, go to Properties, and assign it an Object ID. Assign it any # you want, but for this exercise it will be 32. Then, go to the Material Editor, and create something that's totally glowing white, either using self-illumination or raytrace luminosity. Apply that material to the particle spray
The particle spray should look something like this, if you advance the frames enough
Now for the hard part. Go to Rendering->Video Post. First of all (do this first), click on the blue thing
After you click, select "Perspective" from the list of viewports and press OK. Then, you will need to put a lens flare in the middle of the explosion. Click on "Add Image Filter Event", and add a lensflare
Setup the lensflare. You can either use a provided lens flare file made for explosions/quantum singularities/whatever, or you can use the AFTERFX3.lzf file pre-included with MAX, and red-shift the glows, red-and-orange-shift the manual secondries, increase first manual secondary size to at least twice that of the glow, and apply inferno (gaseous) to the manual secondaries
Anyway you should have a lensflare looking something like this
Then, when you have the lens flare right, go to "Node Sources" and pick the omni light as the node source. Press OK. Find a frame where the particles look good, and go to that frame in the video post renderer and render
Then, back to the video post. Add a Lens Flare Glow. The settings for it are like
Object ID: [whatever # you assigned the superspray]
Size: 0.2
Set glow color to "pixel", the color is something that will make it look better, like yellow, orange, blue, etc. If you really feel like it, you can use a gradient
The video post thingy should look like this
Remember, what you call the lensflare and the SuperSpray glow can be anything you want
By the way, render the image
أرسل من قبل 
